Binder KB 115 (E4), Operating Instructions Manual

Page: 19 / 149

KB (E4 + E6) 02/2017 page 19/148
3. Completeness of delivery, transportation, storage, and installa-
tion
3.1 Unpacking, and checking equipment and completeness of delivery
After unpacking, please check the chamber and its optional accessories, if any, based on the delivery
receipt for completeness and for transportation damage. Inform the carrier immediately if transportation
damage has occurred.
The final tests of the manufacturer may have caused traces of the shelves on the inner surfaces. This has
no impact on the function and performance of the chamber.
Please remove any transportation protection devices and adhesives in/on the chamber and on the doors
and remove the operating manuals and accessory equipment.
CAUTION
Sliding or tilting of the chamber.
Damage to the chamber.
Risk of injury by lifting heavy loads.

Do NOT lift or transport the chamber using the door, the handle, or the lower housing.

Lift KB 53 / 115 from the pallet with the aid of four people in the area of all 4 chamber
feet.

Lift KB 240 from the pallet with the aid of six people in the area of all 4 chamber feet or
use a fork lifter. Set the fork lifter only from the front or rear in the middle of the cham-
ber.

Do NOT lift KB 400 / 720 by hand.

Lift KB 400 / 720 using technical devices (fork lifter) from the pallet. Set the fork lifter
only from the front or rear in the middle of the chamber.

Do NOT set the fork lifter from the chamber side.
If you need to return the chamber, please use the original packing and observe the guidelines for safe
lifting and transportation (chap. 3.2).
For disposal of the transport packing, see chap. 21.1.
Note on second-hand chambers (Ex-Demo-Units):
Second-hand chambers are chambers that were used for a short time for tests or exhibitions. They are
thoroughly tested before resale. BINDER ensures that the chamber is technically sound and will work
flawlessly.
Second-hand chambers are marked with a sticker on the chamber door. Please remove the sticker before
commissioning the chamber.