Binder KB 115 (E4) Operating Instructions Manual Download

Page: 102 / 149

KB (E4 + E6) 02/2017

page 102/148

16.2 Selecting the parameters

Here you can select the parameters, which shall be displayed graphically. To select the parameters, go to

Menu > Measurement chart > Settings > Parameters

Fixed value

08.03.2015 05:05:06

Submenu “Parameters”

(The menu items “Object temperature” and “Control
outputs” are visible only with optional chamber
equipment)

The current setting for each parameter is displayed.

Select the desired parameter
and press the operating button to change its status
On/Off.

The modified setting is displayed.

Parameters

Temperature On

Object temperature On

Control outputs On

Home

Press the button “Close” twice to go back to the graphic display. If any parameter was set to “Off”, it will
not be included in the graphical display.

Summary of Contents for KB 115 (E4)






















































































































































Search results

Summary of Contents for KB 115 (E4)

Reviews:

Related manuals for KB 115 (E4)

Brands by name

Popular brands

Binder KB 115 (E4), Operating Instructions Manual

Search results

Summary of Contents for KB 115 (E4)

Reviews:

Related manuals for KB 115 (E4)

Brands by name

Popular brands