Billion 7800DX, User Manual

Page: 255 / 270

251
TR- 069 Client
TR-069 (short for Technical Report 069) is a DSL Forum (which was later renamed as Broadband
Forum) technical specification entitled CPE WAN Management Protocol (CWMP). It defines an
application layer protocol for remote management of end-user devices.
As a bidirectional SOAP/HTTP based protocol it can provides the communication between customer
premises equipment (CPE) and Auto Configuration Server (ACS). It includes both a safe
configuration and the control of other CPE management functions within an integrated framework. In
the course of the booming broadband market, the number of different internet access possibilities
grew as well (e.g. modems, routers, gateways, set-top box, VoIP-phones).At the same time the
configuration of this equipment became more complicated –too complicated for end-users. For this
reason, TR-069 was developed. It provides the possibility of auto configuration of the access types.
Using TR-069 the terminals can get in contact with the Auto Configuration Servers (ACS) and
establish the configuration automatically and let ACS configure CPE automatically.
Inform:
select enable to let CPE be authorized to send Inform message to automatically connect to
ACS.
Inform Interval:
Specify the inform interval time (sec) which CPE used to periodically send inform
message to automatically connect to ACS. When the inform interval time arrives, the CPE will send
inform message to automatically connect to ACS.
ACS URL:
Enter the ACS server login name.
ACS User Name:
Specify the ACS User Name for ACS authentication to the connection from CPE.
ACS password:
Enter the ACS server login password.
WAN interface used by TR-069:
select the interface used by TR-069.
Display SOAP message on serial console:
select whether to display SOAP message on serial
console.
Connection Request Authentication:
Check to enable connection request authentication feature.
Connection Request User Name:
Enter the username for ACS server to make connection request.
Connection Request User Password:
Enter the password for ACS server to make connection
request.
Connection Request URL:
Automatically match the URL for ACS server to make connection
request.