Operating manual No.
057-2-6-0010-R0
Page 21
Version 2021
EN
6
Dismantling/scrapping section
6.1
Storage
In case of prolonged storage, protect the machine from rain and wind and possibly store it in a dry
place.
Protect the electrical parts from dust and external agents.
The machine can be seriously damaged if, while pending for the installation, it is kept in a critical
temperature environment. Do not expose the machine to temperatures below -10° C or above + 60°
C.
It is forbidden to store the machine or its parts on structures that have not been
specially designed
It is forbidden to store material or equipment on the machine
6.2
Scrapping and disposal
To dismantle the machine, proceed according to the following general disassembly procedure:
Empty the tanks of the pneumatic system.
Disconnect the mechanical parts.
WARNING: When handling waste it is necessary to have the appropriate Personal
Protective Equipment
6.3
Scrapping materials
These are non-hazardous special waste that can be recovered, according to M.D. of February 5
th
,
1998:
•
Ferrous materials, aluminum, stainless steel, copper
•
Plastic materials
•
Hydraulic oil
6.4
Instructions for a suitable waste treatment
Proper management of special waste includes:
Storage in suitable locations avoiding the mixing of hazardous and non-hazardous waste.
Make sure that the transport and disposal/recovery of the waste is done by authorized carriers and
recipients.
The transport of waste to authorized collection centers is allowed only if you are registered at the
Environmental Managers Register.
