Operating manual No.
057-2-6-0010-R0
Page 17
Version 2021
EN
4.5
Warnings for handling and transport
The loading or unloading must be carried out by means of a forklift truck or pallet jack; the
handling of the assembled press must be carried out with bands or lifting chains in compliance with
the standards; according to the indications of the previous paragraph, also check:
-
That the bands or chains are built according to regulations in force and they have the
relevant plates that certify the compliance with the rules.
-
MAKE SURE THAT THE MAXIMUM CAPACITY OF EACH ROPE OR CHAIN IS
HIGHER THAN THE TOTAL WEIGHT OF THE PRESS.
-
Make sure that the ropes or chains are in good condition.
-
It is strictly forbidden for things and/or people to be near the machine, the unloading or
loading area and the means of transport during the loading and unloading operations.
-
Do not carry out sudden maneuvers when lifting or lowering the load.
-
Pay the utmost attention during all handling operations, to make sure that the press and
in particular the oil-hydraulic control unit will not be damaged.
-
Follow the internal and legal provisions concerning lifting and transport.
-
IT IS FORBIDDEN TO APPROACH OR PASS UNDER SUSPENDED LOADS.
N.B. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR ANY DAMAGE
CAUSED BY ANY ACTION DURING THE UNLOADING, LOADING AND HANDLING
OPERATIONS OF THE PRESS.
