Operating manual No.
057-2-6-0010-R0
Page 20
Version 2021
EN
press operates properly.
N.B. After the air exhaust, check and fill up the oil level in the pump. If the cylinder reaches
the end of the stroke with a uniform speed, it is not necessary to add oil.
The press is equipped with a maximum pressure valve to protect the circuit (Figure 4). The valve is
adjusted and then sealed by the manufacturer or marked with a yellow line. Any tampering with the
valve is absolutely forbidden.
Figure 4 – maximum pressure valve
1. clutch cover
6. O-ring
11. body
2. washer
7. valve plate
12. valve core
3. nut
8. washer
13. valve seat
4. register
9. seal
5. spring pin plate
10. spring
