Operating manual No.
057-2-6-0010-R0
Page 16
Version 2021
EN
4.4
Packaging and transport
For the handling of the packed machine, as previously described (see section 4.2), it is necessary to
use suitable lifts whose maximum lifting capacity must not be less than the total weight of the press.
The packaging must be handled with a forklift truck or pallet jack.
N.B. THE TOTAL WEIGHT OF THE PRESS IS SHOWN ON THE IDENTIFICATION PLATE
AFFIXED TO THE MACHINE.
For the possible handling of the assembled machine it is necessary to use bands or lifting chains
positioned as shown in Figure 2.
In order to identify the correct position of the bands or chains, two pictograms complying with UNI
6720 (Figure 2) standards were applied on the front or on the side, on the upper part of the press and
on the sides of the hydraulic cylinder.
Figure 2 – transport and handling of the machine
The machine is tested and in perfect condition.
