Operating manual No.
057-2-6-0010-R0
Page 8
Version 2021
EN
1.7
Normative references
The machine is identified by the CE marking drawn up according to the specifications of the
Machinery Directive 2006/42/EC and subsequent updates.
Reference
Title
2006/42/EC
Machinery Safety Directive
EN ISO 12100 (2010)
Safety of machinery - General principles of design - Risk
assessment and risk reduction.
UNI EN 349 (1993+A1: 2008)
Safety of machinery - Minimum spaces to avoid the crushing of
body parts.
EN 982 (2009)
Safety of machinery - Safety requirements related to systems and
their
components
for
hydraulic
fluid
and
pneumatic
transmissions - Hydraulic fluid
UNI 1285-68
Calculation of metal pipes resistance subject to internal pressure
1.8
General regulations and conventions
This manual is an integral part of the product and MUST be kept for further reference.
FOR ANY CLARIFICATION REQUEST, CONTACT THE EMPLOYER OR THE BIKE-LIFT
TECHNICAL SERVICE, AVOIDING PERSONAL INITIATIVES THAT COULD CAUSE
VERY SERIOUS OR FATAL ACCIDENTS.
Read the warranty carefully before using the machine.
CONVENTIONS:
-
In this manual "right side", "left side", "forward", "backwards", "top" and "bottom" refer to
the operator located in front of the press with the hydraulic pump on his right side.
-
In this manual the measurement units are expressed in the SI international system (e.g. the
capacity of liquids is expressed in liters).
1.9
Key
HYDRAULIC PRESS: is a mechanical device that uses the flow of a fluid (usually hydraulic oil) to
develop a force used to compress different types of materials so as to compact them and eventually
pack them.
OPERATOR: In compliance with Directive 2006/42/EC and subsequent updates, it is specified that
the term "operator" means the person (s) in charge of installing, operating, adjusting and cleaning
the machine. The maintenance and repair operations of the machine are the responsibility of
competent personnel.
