Biddle SensAir, Manual

Page: 50 / 208

O
PERATION
C
OMFORT
A
IR
C
URTAIN
en-50
en
3.2.5 Regulating the strength
Adjusting the automatic strength control
In automatic mode, the strength and temperature of the air-
flow are controlled automatically. Due to weather conditions,
you might want to adjust the automatic setting. If you feel a
cold draught along the floor, you can increase the automatic
strength.
Manual setting of the strength
With the manual setting, you can select the strength. To
achieve maximum climate separation with minimum energy
consumption, Biddle recommends selecting the lowest
strength at which no draught occurs. This setting may possibly
need to be changed during the course of the day.
3.2.6 Required room temperature
You can set the temperature to a comfortable level. This is the
temperature at the air curtain. For units connected to a Dai-
kin system (SRV and SRQ), the temperature control is less
accurate than with water heating or electrical heating.
Temperature adjustments via the home screen of the b-touch
control panel only apply until the starting time of the follow-
ing period. The default value can be set via
menu > Settings > 5. Room temperature .
3.2.7 Errors
The symbol
ä
indicates that there is an error. The error mes-
sage is displayed alongside.
• Touch this message for further information on the error
and for instructions as to how to react.
Warning:
w
Some errors may cause damage or danger to
persons if they are disregarded. If
ä
is
displayed, follow the instructions on the
control panel concerning how to act.
Note:
n
The symbol
ä
and the error message remain
displayed as long as the error has not been
remedied.