Biddle SensAir, Manual

Page: 63 / 208

S
ENS
A
IR
M
ANUAL
O
PERATION
Manual version 1.0- North America (13-09-2016) en-63
en
65. Control panel input The control panel has one input signal interface. This can be
used for an external ON/OFF signal or for an additional tem-
perature sensor.
When the timer is in use, the ON/OFF function of the input of
the control panel is deactivated, irrespective of this setting.
If an additional temperature sensor is connected, this takes
over the function of the sensor in the control panel.
Note:
n
Selecting “ Temperature ” without actually connecting
a sensor leads to an error message.
66. Daikin settings For all models connected to a Daikin system (types
SRV and SRQ)
Specify whether the unit may also be switched on and off by
the Daikin system.
71. Indoor temperature sensor Select the sensor which the system must use for the indoor
temperature:
• Sensor in the control panel.
• Sensor in the air inlet of the unit.
• The average of the sensor in the air inlet of the unit and
the sensor in the control panel.
• The average of the sensor in the air inlet of the unit and
the IR sensor.
Note:
n
The IR sensor measures the gradual temperature
changes of the floor surface. Select this option if
draught or heat loss across the floor often occurs.
Note:
n
For night temperature regulation, the sensor in the
control panel is always used.