Biddle SensAir, Manual

Page: 29 / 208

S
ENS
A
IR
M
ANUAL
I
NSTALLATION
Manual version 1.0- North America (13-09-2016) en-29
en
On models with discharge width 100:
1. Remove the cover of the box on the side of the unit.
2. Optional:
Remove the box from the unit:
- Remove the bracket from the unit and the box.
- Install the box on the wall at an appropriate point.
Note:
n
Do not disconnect the wiring between the box and
the unit.
3. Lead the control cable(s) into the box, through the free
cable gland(s)
3
.
4. Connect the controller of the system to the free terminal
block
4
:
- Connect the control cable of the outdoor unit to F1/
F2.
- If applied on your unit:
Connect the Daikin control panel to P1/P2.
5. Tighten the cable gland(s).
2.5.3 Connecting the cooling medium
• Install the piping in accordance with the installation manual
for the Daikin outdoor unit.
• Solder the piping to the pipes protruding from the upper
side of the unit.
2.5.4 Settings on the Daikin control panel
On the Daikin control panel you can make local make settings
as described in the Installation manual concerned.
The units described in this manual have a few additional set-
tings possibilities: