Biddle SensAir, Manual

Page: 92 / 208

S
ERVICING
C
OMFORT
A
IR
C
URTAIN
en-92
en
6.14.3 Step 2: Copying the settings to another control
panel
1. Connect the USB flash drive to a computer.
2. Change the name of the file that is to be copied from
‘settings_export.txt’ to ‘ settings.txt ’
3. Connect the USB flash drive (with the settings that are to
be copied) to the USB port on the other control panel.
4. Keep the function Import settings pressed down until the
progress of the process is displayed.
The settings are now being imported.
Note:
n
In the event of an error message, check whether the
file name has been changed to ‘
settings.txt ’.
5. When this has been completed, disconnect the USB flash
drive from the control panel.
6. Repeat steps 1 to 3 for each control panel to which you
wish to apply the same settings.
6.15 Updating the software
Biddle is working continuously on improving its products and
recommends that you update the software of the control
panel and of the control circuit board when updates become
available. Consult Biddle’s website for availability.
6.15.1 What you need.
Before updating the software of the control panel, check that
you have the following:
• An empty USB flash drive. The USB flash drive must be for-
matted for FAT or DOS. Do not use a USB hard disk for
the software update.
• A PC with Internet access.