58
Checking the battery charge level
The battery includes a scale with 5 red LEDs on the left side which indicate the charging state. By pressing the
red button for a short time period, the LEDs will give you a precise reading of the current charge level. This
information supplements the reading obtained from the control console.
Checking the total capacity of the battery
The battery can indicate its level of deterioration at all times. In normal conditions of use, the battery preserves
100% of its capacity during 500 complete charge cycles (100%) or during an equivalent number of cycles if
they are partial. From this moment onwards, the battery's capacity will start to decrease. To check if a loss of
capacity has been produced, press the red button which is located on the left side of the battery for 5 seconds.
The leds shall indicate the battery's available capacity and its level of deterioration.
Lethargy function
The battery is equipped with a “lethargy” function. If the charge level of the battery is lower than 50% and use
is suspended for over two weeks, the “lethargy” mode shall activate. This mode prevents the battery from using
the saved energy. To deactivate this function, the battery has to be charged for approximately 5 seconds. When
the battery is fully charged (100%), the “lethargy” function activates after three months without use. We
recommend fully charging the battery at least once every six months.
Safety precautions
Please read and follow these instructions carefully in order to avoid accidents, or damaging the product or other
properties.
Battery:
Do not throw the battery into fire.
Do not use the battery with other devices.
Use the specified charger provided with the battery.
Do not disassemble or modify the battery.
DISCHARGED
CHARGE: 81-100%
CHARGE: 61-80%
CHARGE: 41-60%
CHARGE: 11-20%
CHARGE
: 21-40%
CHARGE
: 1-10%
Flashing
