SK6900 & SK6900TV
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
8
ASSEMBLY CONTINUED
ASSEMBLY INSTRUCTIONS
Take the unit out of the box and place it on the floor as shown in Figure 1. Verify that the parts
are undamaged and quantities are correct.
ATTENTION:
The assistance of a second person is advisable for the assembly work.
Follow the assembly instructions step by step:
ATTACHING THE SIDE BARS
ATTENTION:
At least two people are needed when fastening the side bars (D and E). One
person should hold the side bar while the other fastens the screws.
1.
Remove the screws (b) on the motor cover (Q), Figure (2).
2.
Remove the motor cover (Q).
3.
Only for the SK6900TV model, locate the TV coaxial cable on the left side of the main body
(B). Pass the cable through the left side bar (D) (using the fishing wire) until the cable sticks
out per Figure (2).
4.
Insert the left side bar (D) into the bottom left main body (B). Secure using screws (a). Only
for the SK6900TV model, verify cable is not damaged.
5.
Locate the cable (P) on the right side of the main body (B). Pass the cable through the right
side bar (E) (using the fishing wire) until the cable sticks out per Figure (2).
6.
Insert the right side bar (E) into the bottom right main body (B). Verify cable is not
damaged. Secure using screws (a).
ATTACHING THE HANDRAIL HANDLEBAR
ATTENTION:
At least two people are needed when handling the handrail (C). One person
should hold the handrail (C) while the other inserts the cable and secures the nuts (c).
7.
Only for the SK6900TV model, locate the coaxial TV cable sticking up out of the left side
bar (D). Pass the cable through the handrail (C) (using the fishing wire) and bring it out
through the central hole (O), Figure (3).
8.
Locate cable (P), sticking up out of the right side bar (E). Pass the cable through the
handrail (C) (using the fishing wire) and bring it out through the central hole (O), Figure (3).
9.
Rest the handrail handlebar (C) on top of the side bars (D) and (E), making sure not to
damage any of the cables, and secure using nuts (c).
