SK6900 & SK6900TV
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
15
TROUBLESHOOTING
Table III
PROBLEM CHECKS SOLUTIONS
1. The console does
not switch on.
1a) Make sure that the
machine is plugged in and the
ON/OFF switch is in
position I.
1b) Verify that the console
electric supply cable is
connected.
1a) Plug the machine into the
power supply. Set the switch
to position I.
1b) Connect the console
electric supply cable.
2. The console switches on
but the AC motor fails to
start.
2a) Check if the circuit
breaker is pressed in.
2b) Check if the AC motor is
working.
2a) Switch the machine off
and press the circuit breaker
in. Lubricate the treadmill belt.
2b) Replace the AC motor.
3. Walking motion is jerky
on the treadmill.
3a) Check if the belt is
lubricated.
3b) Check the tension on the
running belt.
3c) Check the tension on the
AC motor drive belt drive belt.
3a) Lubricate the sliding belt.
3b) Adjust the belt tension.
3c) Adjust the drive belt
tension.
4. The machine stops (the
breaker trips).
4) Check that the belt is
lubricated.
4) Review SAFETY
BREAKER on page 4 and
reset the circuit button.
Then review LUBRICATION
on page 10 and lubricate the
treadmill belt.
5. Electrical shocks through
the handrail.
5) Check that the machine is
plugged into a grounded wall
outlet.
5) Plug the machine into a
grounded wall outlet.
6. The treadmill belt skews
off center.
6a) Check if the machine is
level on the floor.
6b) Check if the machine
wobbles.
6c) Check alignment of the
front and rear rollers.
6a, 6b) Use the adjustable
feet to level the machine.
6c) Align the front and rear
rollers.
