BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8980
Digital Compression Tester
CONTENTS
1
2
3
Measuring tube, angled, with rubber cone
Measuring tube, straight, with rubber cone
Measuring hose with spark plug thread
M14x1.25 and M18x1.5
4
5
6
7
Spark plug thread adapter M14x1.25
Spark plug thread adapter M12x1.25
Spark plug thread adapter M12x1.0
Pressure gauge
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
SPECIFICATIONS
Unit
kPa
MPa
bar
psi
kg/cm²
Resolution
1
0.001
0.01
0.1
0.01
Accuracy
<± 0.5%
Temperature coefficient
<± 0.01% FS/°C
Working temperature
< 0 bis 50°C
Humidity range
< RH 65%
Spark plug thread adapter: M10x1 / M12x1.25 / M14x1.25 / M18x1.5
Pressure range: 0.1 - 20.6 Bar (2.0 - 299.5 PSI)
Power:
1.5V AAA Battery
(incl.)
Auto-Off time is about 5 minutes if the system is no operation and no pressure connected.
The measured pressure will be memorized. Memory for up to 16 measurements.
Backlight ON/OFF controllable, back light disabled when the system turns ON.
Automatic zero calibration, runs automatically when pressure gauge switching on.
