Beurer BGL60 mg/dL
31
2
Place a sterile needle lancet in the lancing device and
push the lancet firmly into place.
3
Remove the protective disc from the lancet by twisting
while holding the shaft of the lancet firmly. Retain the
protective disc so that you can safely dispose of the
used needle lancet after taking the blood sample.
4
You will need to use a different cap depending on the
site from which you want to take the sample:
Fingertip
: Cap (grey)
Other parts of the body
: AST cap (transparent)
Place the selected cap on the lancing device and twist it
into place.
5
Setting the puncture depth:
Five different puncture depths can be selected on the
lancing device:
•
1 to 2: Delicate or thin skin
•
3:
Normal skin
•
4 to 5: Thick or rough skin
Turn the cap in the corresponding direction until the ar-
row points to the desired puncture depth.
6
Pull back the tensioning device until you hear it click into
place. If it does not engage, the lancing device may ha-
ve unintentionally already been tensioned when insert-
ing the needle lancet and could already be engaged.
