Beurer BGL40, Instructions For Use Manual

Page: 43 / 52

Beurer BGL40 mg/dL 41
10 I
N THE EVENT OF PROBLEMS
Messages on the display concerning batteries and blood glucose testing
No.
Cause Remedy
E-b Low batteries Replace all batteries.
E-t Temperature of
environment, monitor or
test strip outside approved
range
Repeat test with new test strip once
environment, monitor and test strip are
at room temperature (+20 to +25°C).
E-U Used or contaminated test
strip was inserted
•
Insert an unused and unexpired test
strip
•
Repeat blood glucose test
Messages on the display concerning blood pressure testing
No. Cause Remedy
Err 01 Cuff leaks or pressure too
low Position the cuff correctly (see "5.1
Positioning the cuff“, page 21) and
repeat the test
Err 02 Systolic pressure cannot
be measured Repeat test and do not move or talk
during the test.
Err 03 Cuff pressure is too high
(greater than 300 mmHg) Do not crimp the cuff.
Err 04 Diastolic pressure cannot
be measured Repeat test and do not move or talk
during the test.
Err 07 Systolic pressure out of
range Repeat test and do not move or talk
during the test.