Beurer BGL40, Instructions For Use Manual

Page: 26 / 52

Beurer BGL40 mg/dL 24
6 E
NSURING BLOOD GLUCOSE MEASURABILITY
6.1 Checking code number (coding)
Test strips are classified into different code ranges because of variations in
production conditions. This is why coding is required when you
•
open a new container of test strips
•
find that the code numbers of the monitor and the test strip container do not
match when about to conduct a test.
Coding the monitor
1
There are no test strips in the monitor and it is switched off.
2
Hold the monitor with the display facing you.
3
Press the Code button. The initial display is shown briefly and then SEL is
displayed. The current code number flashes.
4
The new, valid code number is printed on the test strip container. Press the
Code button repeatedly to set the new code number. The number is
increased by one every time the button is pressed. Press and hold the
button to make the process faster. After code 75 the monitor continues to
count from code 51.
5
Save the new code number with the 'M' button. The monitor switches off
automatically.