Beurer BGL40 mg/dL
17
Handling test strips
Note
•
Before using the strips for the first time check that the seal on the
container is intact. If a container seal is damaged, do not use the test
strips.
•
Close container tightly immediately after removing a test strip.
•
Do not use test strips after the use-by date. If expired test strips are
used, test results may be inaccurate. The use-by date can be found
on the container beside the hourglass icon .
•
The test strips can be stored for up to three months after opening the
container. Write this use-by date (date of o 3 months ) on
the label. The storage time is reduced if it extends beyond the use-by
date (see date beside the hourglass icon ).
•
Do not use the test strips if one of the use-by dates ( / ) has
expired.
•
The test strips can be touched anywhere with clean, dry hands.
•
Use the test strip for measurement immediately on removal from the
container.
•
Do not bend, cut or alter test strips in any way.
•
Do not use test strips for measurements if they have come into
contact with liquids.
Storing test strips
Note
•
Store test strips in a cool, dry place above +4°C and below +40°C.
Keep test strips away from direct sunlight or heat. Do not store in a
refrigerator.
•
The relative humidity must be between 10% and 85%.
•
Store test strips in their original container – never place them in a
different container.
Summary of Contents for BGL40
Page 2: ......
Page 50: ......
Page 51: ......
Page 52: ...BGL40_mg dL_1207_GB Subject to error and change...