Beurer BGL40 mg/dL
22
5.2 Correct posture
You can perform the measurement either sitting or
lying down. It is essential to support your arm and hold
it at an angle. Always make sure that the cuff is level
with your heart. Keep your fingers relaxed, do not
make a fist.
In order not to distort the result, it is important to keep still during the measurement
and not talk.
5.3 The measurement
1
Start the test by pressing the ON/OFF button .
2
The cuff inflates automatically. The monitor counts upward and the display
continuously shows the current cuff pressure.
3
Once the cuff pressure is adequate, the air is automatically released
slowly. The monitor continuously shows the current cuff pressure. The
heart beat symbol blinks at the same time accompanied by a beeping
sound. As soon as the heart beat symbol stops blinking read the blood
pressure and pulse values.
For explanations and actions required for the results see the next section
“5.4 Evaluating blood pressure results” page 23. If an error message
appears, read section “10 In the event of problems” page 41.
4
Press the ON/OFF button . If you forget to switch off the monitor, it
switches off automatically after approx. three minutes.
Summary of Contents for BGL40
Page 2: ......
Page 50: ......
Page 51: ......
Page 52: ...BGL40_mg dL_1207_GB Subject to error and change...
