Beurer BGL40 mg/dL
35
•
If the test strip is already in the monitor and you do not apply blood to
the strip within three minutes, the monitor will switch itself off.
Remove the test strip briefly and reinsert it so the monitor switches on
automatically.
•
If you are unable to fill the test strip correctly with blood, please
contact our Customer Service.
7.3 Evaluating blood glucose results
Your monitor can measure glucose values from 20 to 600 mg/dL. The "Lo" warning
message is shown if the glucose value is less than 20 mg/dL. The "Hi" warning
message is shown if the glucose value is greater than 600 mg/dL.
Note
If you suspect that the results are incorrect, first repeat the test and if
necessary carry out a function test with control solution. If the
questionable results continue, ask your doctor.
Summary of Contents for BGL40
Page 2: ......
Page 50: ......
Page 51: ......
Page 52: ...BGL40_mg dL_1207_GB Subject to error and change...
