Beta RR 400, Operating Instructions Manual

Page: 150 / 392

5
REPLACEMENTS
72
GB
REPLACING THE HEADLIGHT BULBS
Release both spring washers and move
forward the lamp holder front cowl.
Carefully remove the tail light bulb together
with lamp holder 1 from the parabola. Lift
the rubber cover 2, release connector 3
and undo the screw 4. Lift the lamp holder
parabola and replace the light bulb with
a new one. Be careful not to touch the
bulb so as not to compromise its efficiency.
To refit, follow the procedure above but in
reverse order.
When necessary, in order to replace the
tail light bulb, simply slide it off the lamp
holder and slide in a new one.
Fasten the lamp holder front cowl to the
supporting pins and fix it with the two
elastics.
REPLACING THE REAR LIGHT BULB
To replace the brake light bulb, follow these
steps:
•
Remove the two fixing screws A and lens
B .
•
Replace faulty bulb C .
•
Refit lens B and fasten it with the two fix-
ing screws A .
The bulbs have bayonet bases. To remove
them, press them lightly, rotate them 30
°
anticlockwise and then extract them.
B
A
C
1
2
3
4
1
2