Beta RR 400, Operating Instructions Manual

Page: 109 / 392

2
OPERA
TION
31
GB
RECOMMENDED LUBRICANTS
To maximize the vehicle’s performance and ensure many years of trouble-free opera-
tion, we recommend using the following products:
Note
It is essential that all renewals should be performed with the products listed in the
table above.
RUNNING-IN
The running-in period lasts approximately 15 hours, during which it is advisable to:
1 During the first 3 hours of operation the engine should only be used to approxi-
mately 50 percent of its power. In addition, the engine speed should not exceed
7,000 rpm.
2 For the next 12 hours of operation the engine should only be used to about 75
percent of its power.
3 Use the vehicle after properly warming up the engine.
4 Avoid travelling at constant speed (changing the speed causes the different com-
ponents to bed in evenly and more quickly).
WARNING
After the first 3 hours or 20 litres of petrol change the engine oil.
•
Always use high-octane unleaded petrol.
•
After using the vehicle on rough ground for the first time, carefully check the
tightening of all nuts and bolts
.
PRODUCT TYPE SPECIFICATIONS
ENGINE OIL BARDAHL XTM15W 50
BRAKE OIL BARDAHL BRAKE FLUID DOT4
FORK OIL EB-H16 SAE 7,5
TIE ROD GREASE BARDAHL MPG2
CLUTCH OIL ARAL VITAM LS (mineral oil)
LIQUID COOLANT IP ECOBLU