BESTEK MEB-7600, User Manual

Page: 30 / 42

30
AMT Configuration
Intel® AMT [Enabled]
Enabled to turn on Intel® Active Management Technology (AMT).
*iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires
additional firmware in the SPI device.
Un-Configure ME [Disabled]
Enabled to unconfigure AMT/ME using a password, or Disabled to proceed without.
USB Configuration
All detected USB devices will be listed here. In case no USB device is detected, None will be prompted.
Legacy USB Support [Enabled]
Enabled to turn on the support for USB devices on legacy operating systems.
Disabled to use USB devices only in BIOS setup menu.
Auto to have the function automatically depending on the existence of USB devices.
F81216 Second Super IO Configuration
Serial Port 3~6 Configuration
Serial Port [Enabled]
Enable/Disable COM3~COM6
Change Settings [Auto]
Select the Serial Port base address from: [IO=2C0h; IRQ=5], [IO=2C8h; IRQ=5], [IO=2B0h; IRQ=5], and [IO=2B8h;
IRQ=5]
NCT6791D Super IO Configuration
Serial Port 1~2 Configuration
Serial Port [Enabled]
Enable/Disable COM1~COM2