BESTEK MEB-7600, User Manual

Page: 28 / 42

28
S5 RTC Wake Setting
Wake System with Fixed Time [Disabled]
Enabled to wake up system at the specified hr::min::sec alarm event.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
*This setting is available only when
Wake System with Fixed Time is enabled.
Wake System with Dynamic Time [Disabled]
Enabled to wake up system after a specific time after the moment the setting is enabled.
Wake up minute increase [1]
Specify the number of minutes after the moment the Wake System with Dynamic Time is enabled, before
waking up system.
*This setting is available only when Wake System with Dynamic Time is enabled.
Dynamic Digital IO
This is the setting to configure Digital I/O pin.
DI00~DI03 Direction [Input]
Configuration options: [Input] [Output]
DI04~DI07 Direction [Output]
Configuration options: [Input] [Output]
Output Level [Hi]
Configuration options: [Hi] [Low]
ACPI Settings
ACPI Sleep State [S3 only (Suspend to...)]
This item specifies the ACPI sleep state to which the system is resumed from Suspend mode.
4.5 The Advanced Menu