BESTEK MEB-7600, User Manual

Page: 26 / 42

26
When the system is powered on, the BIOS will initiate the Power-On-Self-Test (POST) routines. These routines
perform various diagnostic checks. If an error is encountered, the error will be reported in one of two different ways:

If the error occurs before the display device is initialized, a series of beeps will be transmitted.

If the error occurs after the display device is initialized, the screen will display the error message.
Powering on the computer and immediately pressing <
Del > allows you to enter Setup. Another way to enter Setup is
to power on the computer and wait for the following message during the POST:
TO ENTER SETUP BEFORE BOOT
PRESS <CTRL-ALT-ESC> OR <DEL> KEY
Press the <
Del > key or press the < Ctrl >, < Alt >, and < Esc > keys to enter Setup.
The online description of the highlighted setup item is displayed at the right pane of the menu at all time.
Press F1 to pop up a small help window that lists all the function keys and its use.
To exit the Help Window, press
<F1> or <Esc>.
The table below lists all the function keys for the navigation in the BIOS setup menu.
Function Key Description
Up/Down Arrow Key Move Up/Down
Left/Right Arrow Key Move Left/Right
Enter Key Select
+/- Key Change value
ESC Exit
F1 General Help
F2 Previous Values
F3 Short Cut
F5 Optimized Defaults
F10 Save
F12 Print Screen
To exit the Help Window, press
<F1> or <Esc>.
4.1 Entering Setup
4.2 Getting Help
4.3 Control Keys