BESTEK MEB-7600, User Manual

Page: 18 / 42

18
Please remove the four screws to detach the front bezel. After the bezel is detached, system fan and internal
filter can be accessed. Remove one screw (the blue circle) to disengage the fan bracket off the front panel.
Please put the fan cable off the motherboard connector before pulling the fan bracket out of the place.

The two screws below (red circles) hold the filter cover on the fan bracket. Please get rid of them to access the
filter. As the filter is not at the place, the four screws that hold the system fan on this bracket can be found.
Twist them to have them off the place just to separate the system fan from the bracket.

2.8 Changing System Fan and Filter