67
A
B
A
B
MACHINE MAINTENANCE
An overlock machine requires more maintenance than
a conventional machine for two reasons:
1. A lot of lint is produced due to the cutting action
of the knives.
2. An overlock runs at a very high speed and needs
to be oiled frequently to lubricate the internal
working parts.
Cleaning The Machine
Oiling The Machine
–
Clean the lint from the looper and knife area
often with a dry lint brush.
–
The oiling points shown in the diagram, should
be oiled periodically.
CAUTION:
Before cleaning your machine, disconnect
power line plug from the wall receptacle.
CAUTION:
Before lubricating your machine, disconnect
power line plug from the wall receptacle.
PLEASE NOTE:
Use only sewing machine oil. Do not use any
other oil or damage could result.
