22
Threading the Upper Looper (Blue)
–
Raise the presser foot to open the tension
discs.
–
Thread the upper looper as indicated
(1)
–(
8)
.
2
2
1
3
2
1
3
8
6
4
5
7
3
2
2
1
3
2
1
3
8
6
4
5
7
3
CAUTION:
Be sure to turn off power switch.
–
Pass thread from back to the front through the
thread guide
(1)
.
–
Thread the pre-tension guide by pulling the
thread towards the right until it slips under guide
(2)
. Then pull thread along the right side of pre-
tension as illustrated.
–
While holding thread with fingers, pass it
between the tension discs and pull thread down
to make certain it is properly located in between
the tension discs
(3).
