25
Threading the Chainstitch/
Coverstitch Looper (Violet)
–
Raise the presser foot to open the tension
discs.
–
Thread the chainstitch/coverstitch looper as
indicated
(1)–(11)
.
1
2
2
3
3
1
2
3
4
5
6
7
8
9
11
10
1
2
2
3
3
1
2
3
4
5
6
7
8
9
11
10
CAUTION:
Be sure to turn off power switch.
–
Pass thread from back to the front through the
thread guide
(1)
.
–
Thread the pre-tension guide by pulling the
thread towards the right until it slips under
guide
(2)
. Then pull thread along the right side
of pre-tension as illustrated.
–
While holding thread with fingers, pass it
between the tension discs and pull thread down
to make certain it is properly located in between
the tension discs
(3)
.
