31
9
10
10
10
9
10
10
10
–
Continue to thread points
(4)
–(
10)
.
Before threading the eye of the needle, make sure
thread is in front of thread guide located on the bottom
of the needle holder
(9)
.
–
The position of the thread must be behind the
thread guide.
–
Draw about 10 cm (4 inches) of thread through
needle eye towards the rear of machine.
–
Place the thread to the back, under the presser
foot.
–
Thread the eye of the right needle
(10)
.
PLEASE NOTE:
Slip thread into the rear slot on the thread guide
(5)
and bottom slot of take-up lever cover
(6)
.
Then slip thread into the right slot on the thread
guide
(7)
, and into the right slot on the thread
guide
(8)
.
PLEASE NOTE:
Use of tweezers in the looper cover will make
needle eye threading easy.
• Center Coverstitch/Chainstitch Needle
(Green)
(D On Needle Clamp)
–
Raise the presser foot to open the tension
discs.
–
Thread the center coverstitch/chainstitch
needle as indicated
(1)–
(10)
.
9
10
10
10
CAUTION:
Be sure to turn off power switch.
