32
2
2
1
3
3
6
7
8
10
5
4
9
–
Continue to thread points
(4)
–(
10)
.
Before threading the eye of the needle, make sure
thread is in front of thread guide located on the bottom
of the needle holder
(9)
.
PLEASE NOTE:
Slip thread into the middle slot on the thread
guide
(5)
and bottom slot of take-up lever cover
(6)
.
Then slip thread into the middle slot on the
thread guide
(7)
and thread guide
(8)
.
2
2
1
3
3
6
7
8
10
5
4
9
–
Thread the pre-tension guide by pulling the
thread towards the left until it slips under guide
(2)
. Then pull thread along the right side of pre-
tension as illustrated.
–
While holding thread with fingers, pass it
between the tension discs and pull thread down
to make certain it is properly located in between
the tension discs
(3)
.
–
Pass thread from back to the front through the
thread guide
(1)
.
