10
OFF
ON
2
1
5
1
2
3
7
4
8
6
Principal Parts behind the Looper
Cover
PREPARATION TO SEWING
HOW TO OPEN LOOPER
COVER
(1)
Upper looper
(2)
Upper knife (moveable)
(3)
Standard presser foot Overlock/Coverstitch
(4)
Fixed position lower knife
(5)
Lower looper
(6)
Chain/Cover looper
(7)
Rolled Hem lever
(8)
Upper looper clutch
Power Switch
–
Connect the controller/electric plug to the
machine receptacle.
–
Plug power line into electric outlet.
–
Push " l " mark side to turn "ON"
–
Push "O" mark side to turn "OFF"
1. Push the cover to the right as far as it will go.
2. Pull cover down toward you.
CAUTION:
Be sure to turn off power switch.
CAUTION:
Be sure looper cover is closed when sewing.
CAUTION:
Use only foot controller provided with this
machine. (Type 4C-316B for USA & CANADA
only). Be sure to make reference to “Warning”
on following Page.
Foot Controller
–
To run the machine and control the speed,
press the controller.
–
The harder you press, the faster the machine
will sew.
–
To stop the machine from sewing, remove your
foot from the controller
