Translated user manual (EN-V1)
BENOMIC S500
29 / 57
8.1
Operation
8.1.1
Undercarriage controls
1. MAIN SWITCH / EMERGENCY STOP
The
BENOMIC S500
can be switched on and off with the main switch. If the red key is in
the running direction (vertical), then the trolley is ON, if the red key is perpendicular to the
running direction (horizontal), then the trolley is OFF. The
BENOMIC S500
is activated
after a reset button (2/10) is operated. When the
BENOMIC S500
is switched on, a bleep
signal will sound and the indicator will flash Red once and then illuminate in
Green/flashing, the battery status indicator will also start up (see Platform Controls).
When the
BENOMIC S500
is not being used or charged, the red key should be taken out
of the ignition. The main switch also serves as an emergency stop. If the key is positioned
horizontally, the trolley is completely switched off.
2. SCISSOR UNLOCK SWITCH KNOB/RESET
The release button (2) releases the service button (3) for use, this button must be pressed
continuously during the upward or downward movement.
In addition the unlock/reset button (2) activates
the BENOMIC S500
after the main switch
(1) is moved into the vertical position.
3. SCISSOR-CONTROL SERVICE BUTTON
The scissor-control selector switch allows the platform to be raised or lowered without
standing on it. The
BENOMIC S500
should not be on the pipe-rails for this operation!
Keep the release button (2) pressed and turn the service button (3) clockwise (white stripe
up) and the platform will rise as long as the buttons are operated. Keep the release button
(2) pressed and turn the service button (3), white stripe downwards, and the platform will
lower as long as the button is operated.
Attention!
-
Ensure that no persons or objects can get under or between the scissors
construction while lowering!
-
An acoustic signal will sound when the platform slowly falls in the last bit!
-
Provide adequate space above the BENOMIC S500 to allow the scissors to go
up!
-
Do not use the buttons if anyone is on the platform!
Figure 8.1; Controls on
the undercarriage of
the BENOMIC S500
4a
1
4b
4b
2
3
