Translated user manual (EN-V1)
BENOMIC S500
10 / 57
-
Repairs on the BENOMIC S500 may only be carried out by personnel
instructed by Berg Hortimotive.
-
When servicing the scissors, support it at all times using the scissor-lock
(see 9.2).
-
Never carry out work on the BENOMIC S500 while someone else is operating
it. Always switch it off using the main switch, and remove the charging plug
from the trolley before carrying out maintenance.
-
Check the BENOMIC S500 every day for defects and give it regular
maintenance, see chapter 9: Maintenance.
-
Clean the controls and safety pictograms regularly and in good time.
- Operating functions and safety pictograms must be visible at all times.
-
The BENOMIC S500 must always be switched off after use, using the main
switch.
-
Never leave the BENOMIC S500 unattended,
-
unless the key is removed from the main switch.
-
It is forbidden to make any modifications/alterations to the BENOMIC S500
without written permission from Berg Hortimotive
-
When leaving a track, first stop and check whether anybody is standing in
the direct vicinity before continuing onto the concrete path.
-
Before going onto a track, ensure that there are no obstacles such as plant
remains, etc. lying on the rail.
-
Never clean the BENOMIC S500 with a water hose, high-pressure water gun
or steam cleaner.
-
When moving the BENOMIC S500, other than on the pipe-rail, or crossing on
a concrete path, the platform has to be at its lowest position.
-
The BENOMIC S500 is besides driving on a pipe rail system, also suitable for
driving on a flat paved floor (concrete), which is rough enough to be able to
drive and stop safely. The surface condition must comply with NEN2743:
2003 Concrete floors.
-
Never use the BENOMIC S500 outdoors or on the public road.
-
Stepping down from the platform when it is not completely in the lowest
position is prohibited.
-
Follow the battery safety specifications, see Appendix 3.
-
Beware of feet and toes when operating the lifter on the BENOMIC S500! The
trolley moves a few centimetres forwards when setting down!
-
Wearing shoes with safety toecaps (minimum S1) is mandatory.
