Ø
the
Teleservice
page is downloaded;
Ø
the Date and Time of Monitoring Maintenance are
programmed at the Keypad (refer to “Teleservice” in
the KEYPAD PROGRAMMING MANUAL).
You must Enable the
Central Station Maintenance
option and set the Date and Time, as follows.
Date
Enter the Date of the
Central Station Mainte-
nance Request
signal.
Time
Enter Time of the
Central Station Maintenance
Request
signal.
Description
Enter the message that will be shown on
the Keypad (in View Mode) when a
Central Station
Maintenance Request
is received.
Logger – Events setup
The
Events setup
page will allow you to select the
Events that will be recorded in the Logger, and those
that will be printed, as follows.
+
The Event Printout is an accessory feature, and is
provided by the optional K3-PRT Printer Interface
(refer to “K3-PRT Printer Interface” in the
APPENDIX).
No.
This is the Event ID Number.
Description
This is the Event label.
Enabled
Select the Events that will be recorded in the
Logger.
Printer
Select the Events that will be printed.
Events-Actions
The
Events-Actions
page determines how the system
will operate.
The Table in the
Events-Actions
page will allow you to
associate the Events (managed by the Control Panel)
with the Output, Digital Communicator and Dialler Ac-
tions, as follows.
No.
This is the Event ID Number.
Description
This is the Event label:
Ø
the round brackets show the label of the device (Key-
pad, Reader, etc.) that is associated with the “Object”
(Zone, Code, Key, etc.) that generated the event;
Ø
the square brackets show the Description of the “Ob-
ject” (Zone, Code, Key, etc.) that generated the
event.
+
The events shown depend on the selected detail
level (see “Events Details”).
Output
The
ON
column is for the ID number of the Out-
put that must activate when the Event in question oc-
curs (refer to
No.
column on the
Outputs
page).
Enter
0
if the event is not to activate any Output.
+
You can select the required Output by double click-
ing the corresponding cell in the
Output
column.
Dig. Comm.
The
ON
column is for the ID Number of
the Actions the Digital Communicator must generate
when the Event in question starts (see
No.
column in
the
Actions
window on the
Digital Communicator
page) .
The
OFF
column is for the ID Numbers of the Actions
the Digital Communicator must generate when the
Event in question ends (see
No.
column in the
Actions
window on the
Digital Communicator
page).
Enter
0
in the
ON
or
OFF
column if the Digital Commu-
nicator for NO Actions.
+
You can associate the Digital Communicator Ac-
tion with the Event by double clicking the corre-
sponding cell in the
Dig. Comm. ON
or
Dig.
Comm. OFF
column.
Dialler
The
ON
column is for the ID Numbers of the Ac-
tions the Dialler must generate when the Event in
question starts (see
No.
column in the
Actions
window
on the
Dialler
page).
The
OFF
column is for the ID Numbers of the Actions
the Dialler must generate when the Event in question
ends (see
No.
column in the
Actions
window on the
Dialler
page).
Enter
0
in the
ON
or
OFF
column if the Dialler is not to
generate any Actions.
+
You can associate the Dialler Action with the Event
by double clicking the corresponding cell in the
Dialler ON
or
Dialler OFF
column.
n
Telephone action priority
Priority Actions will override all other Actions in the call
queue.
The Digital Communicator Action marked with an excla-
mation mark (refer to “Actions” in the “Digital Communi-
cator” section) has priority over all other Telephone
Actions. The Dialler Action marked with an exclamation
mark (refer to “Actions” in the “Dialler” section) has pri-
ority over all other Telephone Actions except the priority
Action set for the Digital Communicator.
+
The priority Telephone Actions are useful in situa-
tions that require quick intervention, such as Medi-
cal emergency and Duress.
KYO 300-KYO100
PROGRAMMING
59