All
If this option is enabled, the Control Panel will call
all the Telephone numbers for the corresponding Ac-
tion. If this option is disabled (at default). The Dialler will
call associated Telephone numbers until one call is suc-
cessful. To enable (
Y
) this option, press
ENTER
or dou-
ble click on the relevant cell.
Message 1-2-3-4-5
This option will allow you to setup
the Voice Messages (refer to “Voice Messages” and
“Preset Messages” for further information).
Description
This editable field is for the Action label.
Hide
This button will allow you to hide the Telephone
number columns (1 through 32), and Voice Message
columns (Messages 1 through 5).
Events
This button will allow you to view all the Events
that generate the selected Action.
Digital Communicator
The Digital Communicator will allow you to define up to
100 Actions. Each Action can be associated with one or
more Events in the
Events-Actions
page, and will sig-
nal (via telephone to Central Stations, etc.), the start
and/or end of its associated Events.
Each Digital Communicator Action can transmit two dif-
ferent event codes to two distinct groups (8 Telephone
numbers per group). Thus it will be possible to transmit
the same event in two different Reporting formats (e.g.
a Trouble signal to the Installer and Central Station).
Event Queue
The Digital Communicator will not end
the communication until all the events destined for the
connected service have been transmitted. This feature
reduces communication time, and call costs.
+
Events will not be queued for Telephone numbers
which are associated with Reporting formats with
the Voice feature.
The layout of the
Digital Communicator
page is as fol-
lows.
no.
This ID number (1 through 8), corresponds to the
Telephone number Identifier in the
Actions
window.
This Identifier number DOES NOT CORRESPOND to
the Telephone Identifier number in the General
Phonebook.
Telephone Number to call
This field will allow you to select the Telephone Num-
bers for the Digital Communicator (from the General
Phonebook on the Telephone page).
Protocol
This field will allow you to select the Re-
porting format.
This Control Panel supports the Reporting formats
shown Table 4. (refer to “Communication Protocols” in
the APPENDIX).
The first five protocols are also available with the
Voice
feature.
+
Both the Control panel and Central Station must be
able to manage voice communications, otherwise,
Reporting formats with the
Voice
feature cannot be
used.
Once the digital transmission has been completed, the
Control Panel will open the
Voice
channel, and the
Central Station operator will be able to open a Talk/lis-
ten session.
The system Users will be able to communicate with the
Central Station operator via the
VOX-REM
Microphone
and Speaker boards (refer to “K3-VOX Voice Cards” in
the “APPENDIX”).
The Voice channel will remain open for the pro-
grammed time (refer to “
2-way audio
”), or until the Cen-
tral Station operator ends the session.
KYO 300-KYO100
PROGRAMMING
53
Figure 38
Digital Communicator page