LED
DESCRIPTION
red
I
Status of Reader Partitions
OFF = ALL the Reader Partitions are
DISARMED;
ON
= AT LEAST ONE of the Reader Partitions
is ARMED.
Slow blinking
= AT LEAST ONE of the
Reader Partitions presents AT LEAST ONE
Alarm or Tamper memory, and all Partitions
are DISARMED.
Fast blinking
= AT LEAST ONE of the
Reader Partitions presents AT LEAST ONE
Alarm or Tamper memory, and AT LEAST
ONE Partition is ARMED.
amber
A
A Mode Arming:
OFF = the status of the Keypad Partitions
DOES NOT MATCH the A Mode Arming con-
figuration;
ON
= the status of the Keypad Partitions
MATCHES the A Mode Arming configuration.
green
B
B Mode Arming:
OFF = the status of the Keypad Partitions
DOES NOT MATCH the B Mode Arming con-
figuration;
ON
= the status of the Keypad Partitions
MATCHES the B Mode Arming configuration.
+
These descriptions are not valid when a
key is present at the Reader.
+
If ALL THREE LEDs blink, the system HAS NOT
RECOGNIZED the Key/Card (false Key/Card).
If ONE LED blinks, one or more of the Partition
zones is already in Alarm status.
n
Input and Output Expanders
No.
DESCRIPTION
96
Snatch microswitch (solder side)
97
Microprocessor
98
Buzzer
No.
DESCRIPTION
99
Buzzer Mode Jumper:
1
ooo
3 = buzzer OFF (at default)
1
//o
3 = buzzer will activate when terminal
[OC6] opens
1
o//
3 = buzzer will activate when terminal
[OC6] connects to negative
100
Tamper ands Snatch mode Jumper:
oo
= Microswitches enabled (at default)
//
= Microswitches disabled
101
Tamper microswitch
102
Terminal Board
103
Frontplate screw locations (4)
104
Expander (Input, Output, etc.)
105
Expander screws (2)
106
Cable entry
107
Screw locations (2) for mounting to
503
outlet
box or similar
108
Cable duct entry
109
Surface mounting screw locations (2)
110
Snatch bracket
111
Plastic tooth (closes the Tamper microswitch)
14
5V
12
V
BPI 5V
BL24
0
TA
M
P.
DI
S.
BPI
LE
V.
12
34
ON
5
R
C
+
L1
L3
L5
+F
+F
+F
L2
L4
L6
12
3
4
ON
+F
+F
+F
+F
R
C
OC3
OC1
+
OC2
OC4
OC5
OC6
BPI 5V
3
1
TA
M
P.
DI
S.
BPI
LE
V.
5V
BL238
12
V
72
a)
b)
69
9697
73
72 80 69
73
102
80
101
100
102 96 101
98
99
100
97
Figure 10
M-IN/6 Input Expanders (
a
) and M-OUT/6
Output Expanders (
b
)
103
103
103
104
105
96
106 107 108
109
107
111 103
105
101
109
110
Figure 11
Module and Expander box