Bentel Security KYO 320, Installation Manual

Page: 19 / 52

Ev. on red LED
Even t n. ----
To as so cia te an event with the Red LED (en ter the
Event ID num ber (re fer to the EVENT co lumn in the
“Events-Actions” ta ble un der “PROGRAMMING” in the
INSTALLATION MANUAL). Enter ze ros, if no event is
to be as si gned to the Red LED.
6b. Press B to go to the next step (to as sign an event to
the Yel low LED).
Ev.on yel. LED
Even t n. ----
6c. Press B to go to the next step (to as sign an event to
the Gre en LED).
Ev.on green LED
Even t n. ----
then press ENTER .
From step 6, to se lect the 3 LED ope ra ting mode.
Re a der 001
3 LED
6d. Press ENTER ;
Partition 1-8
XXXXXXXX
6e. Se lect the Re a der par ti tions (re fer to “Ena bling Par -
ti tions and A, B, C and D Mode” un der “Using the Key -
pad”), then press
ENTER .
Yel.arm. 1-8
AAAAAAAA
6f. Set up the A Mode con fi gu ra tion for the Re a der con -
cer ned (re fer to “Ena bling Par ti tions and A, B, C and D
Mode” un der “Using the Key pad”), then press
ENTER .
Gre en arm. 1-8
AAAAAAAA
6g. Set up the B Mode con fi gu ra tion for the Re a der con -
cer ned (re fer to “Ena bling Par ti tions and A, B, C and D
Mode” un der “Using the Key pad”), then press
ENTER .
7. Press the A or B but tons to scroll thro ugh and pro -
gram the fol lo wing op tions: “ View.contr. mem. ” (View
con trol unit alarm me mory), “ View. Area.mem. ” (View
area alarm me mory) , “ Comp EN50131 ” (Com pa ti bi lity
with EN50131), “ Buz zerEntryTi me ” (Buz zer du ring
entry time) and “ Buz zer Exit Ti me ” (Buz zer du ring Exit
time), then press ENTER and re turn to step 3.
n
Input Expanders
1
From the Con fi gu ra tion menu, using A or B , se lect the
Input Expan ders op tion.
Con fi gu ra tion
Input Expanders
1. Press ENTER ;
Input Exp. n.001
InputExpander001
2. Using A or B , se lect the Input Expan der
1
to be pro -
gram med, then press ENTER .
De scrip tion
InputExpan der001
3. Enter the Input Expan der
1
la bel (re fer to “Edi ting a
text” un der “Using the Key pad”), then press ENTER .
InputExpan der001
Not pre sent
4. Press ON to en rol the Input Expan der
1
(Pre sent),
then press ENTER to con ti nue. To unen rol an Input
Expan der (de le te from the Con fi gu ra tion), press OFF .
5. To go back to the Con fi gu ra tion menu, press ESC .
n
Output Expanders
2
From the Con fi gu ra tion menu, using A or B , se lect the
Out put Expan ders op tion.
Con fi gu ra tion
Out put Expanders
1. Press ENTER .
Output Exp.n.001
Expander out 001
2. Using A or B , se lect the Out put Expan der
2
to be pro -
gram med then press ENTER .
De scri ption
Expan der-out 001
3. Enter the Out put Expan der
2
la bel (re fer to “Edi ting
texts” un der “Using the Key pad”), then press ENTER .
Expan der-out 001
Not present
4. Press ON to en rol the Out put Expan der
2
, then press
ENTER to con ti nue.
KYO320 PROGRAM PANEL 19
1 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see “M-IN/OUT Programmable
Input/Output Expander” in the “INSTALLATION” chapter in Vol. 1).
2 M-IN/OUT expander programmed as Input Expander or Input/Output Expander (see “M-IN/OUT Programmable
Input/Output Expander” in the “INSTALLATION” chapter in Vol. 1).