BENSHAW M2L 3000, User Manual

Page: 49 / 140

5 - Operation
49
Parameter Settings System parameters can be viewed and adjusted from the HMI, to customize the behavior of the
Drive. Parameter values are stored by the Drive, and retained when control power is lost. Refer to
Section 5 - Parameter List for a listing of all user accessible parameters, and Section 6 -
Parameter Descriptions for information regarding the usage of each parameter.
Depending on the parameter, the HMI will display either a numeric value, or a drop-down
selection.
NOTE: Some parameters cannot be changed while the drive is running. The HMI will
display an error message, and the requested value will not be saved to the Drive.
NOTE: A security pin can be used to lock all parameters. Each parameter can still be
selected to view the current value, but the HMI will not allow that value to be changed.
This lock can be adjusted in
Settings.