BENSHAW M2L 3000, User Manual, Page: 57 / 140

6 – Parameter List
57
6 - Parameter List
DRIVE Group Parameter List
Table 18: DRIVE Group Parameter List
Parameter Description Units / Range Default
Adjust Dur-
ing Run?
Modbus Reg-
ister
DRIVE-00 Motor Type
0: Induction
1: Synchronous
Induction Yes 40173
DRIVE-01 Motor Rated Current 1.0 – 6000.0 A 126.0 No 40048
DRIVE-02 Motor Rated Voltage 100 – 15000 V 4160 No 40050
DRIVE-03 Motor Base Frequency 20.00 – 300.00 Hz 60.00 No 40051
DRIVE-04 Motor Rated kW 0 – 50000 kW 746 Yes 40174
DRIVE-05 Motor Poles 2 – 36 4 No 40053
DRIVE-06 Motor Rated Slip 0.00 – 10.00 Hz 1.00 No 40052
DRIVE-07 Reverse Enable
0: Disabled
1: Enabled
Disabled No 44484
DRIVE-08 Starting Frequency 0.00 – 10.00 Hz 0.10 Yes 40047
DRIVE-09 Minimum Frequency 0.00 – 300.00 Hz 0.00 Yes 44489
DRIVE-10 Maximum Frequency 1.00 – 300.00 Hz 60.00 Yes 40046
DRIVE-11 Acceleration Ramp Time 0.0 – 1200.0 Sec 120.0 Yes 40040
DRIVE-12 Acceleration Profile
0: Linear
1: U Curve
2: S Curve
Linear No 40041
DRIVE-13 Acceleration S Curve Factor 1 – 99% 50 No 40042
DRIVE-14 Deceleration Ramp Time 0.0 – 1200.0 Sec 120.0 Yes 40043
DRIVE-15 Deceleration Profile
0: Linear
1: U Curve
2: S Curve
Linear No 40044
DRIVE-16 Deceleration S Curve Factor 1 – 99% 50 No 40045