56
Using the projector
En
gl
ish
System Setup: Basic menu
Function
Description
Language
Sets the language for the On-Screen Display (OSD) menus. See
"Using the
menus" on page 23
for details.
Projector Installation
The projector can be installed on a ceiling or behind a screen, or with one or
more mirrors. See
"Choosing a location" on page 12
for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your last key press. The
range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Sets whether to display the OSD messages about the status of detecting signals.
Operation Settings
Direct Power On
Sets whether to turn the projector directly on without pressing the
POWER
key on the projector or
ON
on the remote control when the
projector is plugged in.
Signal Power On
Sets whether to turn the projector directly on without pressing the
POWER
key on the projector or
ON
on the remote control when the
projector is in standby mode and the signal is feed through the VGA cable.
Auto Power Off
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Power Off" on page 61
for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once elapsed the
image will return to the screen. See
"Hiding the image" on page 39
for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Remote Receiver
Allows you to choose to activate the
Front
,
Rear
, or
Front+Rear
remote
control IR sensors.
Panel Key Lock
Disable or enables all panel key functions except
POWER
on the projector
and keys on remote control. See
"Locking control keys" on page 39
for details.
Background Color
Allows you to choose the color of the background screen that will be displayed
when there is no input source detected.
Splash Screen
Allows you to select which logo screen will be displayed during projector start-
up. You can choose
BenQ
logo screen,
Blue
screen or
Black
screen.
Test Pattern
See
"Using the test pattern" on page 41
for details.
The function is only available when the projector detects no input
signal.
I
I
I
I
I
I
I
I
