43
Using the projector
En
gl
ish
Setting the lamp mode
This projector provides two lamp modes for different purposes:
You can perform one of the following methods to choose a lamp mode according to your preference.
Using the remote control:
1. Press
Lamp Mode
on your remote control, the lamp mode page is displayed.
2. Press to highlight your preferred lamp mode and press
MODE/ENTER
.
Using the OSD menu:
1. Press
MENU/EXIT
and then press
/ until the
System Setup: Advanced
menu is highlighted.
2. Press to highlight
Lamp Settings
and press
MODE/ENTER
.
3. Press to highlight
Lamp Mode
and press
MODE/ENTER
.
4. Press to highlight your preferred lamp mode and press
MODE/ENTER
.
A slight variation in the picture brightness and colors may be observed during the very short time of
switching lamp modes.
Lamp mode
User benefit
Suitable environment
Normal
(The lamp is
used in normal mode)
•
Delivering bright and clear images
•
Suitable for high-ambient-light environments
•
Allowing continuous and non-stop operation under
critical situations
Large, well lit meeting rooms
or auditoriums
Economic
(The lamp is used in economic mode)
•
Extending the lamp life
•
Allowing continuous and non-stop operation under
critical situations
Small-mid boardrooms
