40
Using the projector
En
gl
ish
Adjusting the sound
The sound adjustments made (such as functions shown below) will have an effect on the projector
speaker(s). Be sure you have made a correct connection to the projector audio input. See
"Connecting to
video equipment" on page 17
for how the audio input is connected.
• Each time when you select a different source, the projector also changes the sound settings to which was
last set for that particular source.
• Sound adjustments cannot be made during Quick Search.
Muting the sound
To temporarily turn off the sound:
1. Press
MENU/EXIT
to open the OSD menu and press / to highlight the
Source
menu.
2. Press
to
highlight
Audio Settings
and press
MODE/ENTER
. The
Audio Settings
page is
displayed.
3. Press
to
highlight
Mute
and press / to select
On
.
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press /VOLUME- on the remote control, or:
1. Repeat steps 1-2 from above.
2. Press
to
highlight
Volume
and press / to select a desired sound level.
Adjusting the Microphone sound level
To adjust the microphone sound level:
1. Repeat steps 1-2 from above.
2. Press
to
highlight
Microphone Volume
and press / to select a desired sound level.
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1-2 from above.
2. Press
to
highlight
Power On/Off Ring Tone
and press / to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the Power On/Off Ring Tone.
