31
Using the projector
En
gl
ish
Fine-tuning the selected picture mode
The pre-defined picture mode settings can be altered via the available items shown in the
Picture
menu.
To fine-tune the picture mode:
1. Press
MENU/EXIT
and then press / until the
Picture
menu is highlighted.
2. Press to highlight the item you want to adjust and press / to set your desired value. Your
selection is automatically stored in the projector and associated with that input source.
See
"Fine-tuning the picture quality" on page 33
and
"Advanced picture quality controls" on page 34
for details.
Each time you change the picture mode, the projector also changes the setting to the one which was last set
for that particular picture mode on that particular input. If you change the input source, the most recently
used picture mode and settings for that input and resolution will be restored.