143
Appendix: Brug (under Launcher-kilde) for firmware version før v01.00.19.00
1. Choose one of the following options:
• Connect your smartphone to the same wireless network as your projector.
• Enable wireless hotspot for your projector and then connect your smartphone to the projector’s
wireless hotspot. For instructions on how to enable wireless hotspot for your projector see
.
2. Open the
BenQ Smart Control
app
on your smartphone.
3. Select the projector from the
BenQ Smart Control
device list.
4. Choose one of the following methods to use
BenQ Smart Control
:
• Tap
DPad
to use the pre-configured buttons in the app to control your projector.
You must be connected to either the same wireless network as the projector or the projector’s wireless hotspot for
BenQ Smart Control
to work correctly.
The default name for the projector is "BenQ E600-xxxx" where the final four digits are the last four digits of its MAC
Address.
