118 Appendix: Brug (under Launcher-kilde) for firmware version før v01.00.19.00
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a camping
trip), you can configure the projector to act as a wireless hotspot to create a closed network for
devices to connect directly to the projector via a wireless connection and to project files from their
local storage.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
).
2. Power on the projector (see
Start af projektoren on page 22
).
3. On the home screen of the
BenQ Launcher
interface, press the down arrow key the three
times to navigate to the
Settings
menus.
4. Select
Settings
and press
OK
.
5. Select
Hotspot
and press
OK
.
The projector will have no access to the Internet while in wireless hotspot mode.
