AeroNav 900/880 Series Pilot’s Guide
89000039-010
Rev 1 May 2019
Aux Subsystem
5-7
To remove a preset frequency, put the page into edit mode and
then either touch or rotate the right knob to move the cursor to the
desired preset. Then press the CLR button to clear the frequency
and take the page out of edit mode.
The com preset list is primarily designed to work with a cockpit
control used to cycle through each entry in the com preset list.
The cockpit control is typically implemented as a dedicated com
preset switch mounted on the yoke. The AeroNav actually
supports two switches, one that will cycle forward and another
that will cycle backward through the list.
Each actuation of the switch will nominate the next (or previous)
frequency in the list to the #1 standby slot and cause the AeroNav
to briefly display a small dialog box next to the #1 Standby slot
indicating which preset frequency was nominated. A frequency
from the preset list may also be nominated by touching the
desired preset or pressing the ENTR button while the page is not
in edit mode
#1 Standby Slot
If the com preset page is displayed at the time the cockpit control
is activated, a small arrow will indicate which preset is tuned.
Com Preset Arrow
Summary of Contents for AeroNav 880
Page 4: ...AeroNav 900 880 Series Pilot s Guide 89000039 010 ii Rev 1 May 2019 Blank Page...
Page 94: ...AeroNav 900 880 Series Pilot s Guide 89000039 010 2 26 SVS Subsystem Rev 1 May 2019 Blank Page...
Page 292: ...AeroNav 900 880 Series Pilot s Guide 89000039 010 5 68 Aux Subsystem Rev 1 May 2019 Blank Page...
Page 315: ...AeroNav 900 880 Series Pilot s Guide 89000039 010 Rev 1 May 2019 Navigation 6 23...
