Beltrame S 2022 User Manual Download

Page: 41 / 46

In reference at the above picture, you can ﬁnd:

10.6 Other inside the Device Proper�es Tree

10.7 Monitoring features

Inside the S2022 there are 4 commands that oﬀer strong monitoring capability to the Beltrame Conﬁgurator

suite:

Monitor Trend: to use the PC so�ware as an oscilloscope;

Monitor Default Panel: to have an overview of the reading and the alarm/limiters status;

Monitor P-Q: to iden�fy the machine working point on the P-Q diagram;

Step Window: to set the step func�on, useful for stability adjustment.

10.7.1

Monitor Trend

Following imagine is a screenshot obtained from the monitor trend. It shows excita�on and de-excita�on voltage ramps:

Command

Descrip�on

Monitoring 2

This oﬀers a more detailed overview of the regulator status

Regulator PID Monitoring

This shows the real �me regulator PID status (in AVR, PF, or VAR mode)

Current PID Monitoring

This shows the real �me PID in current regula�on mode (FCR) status

Monitoring 1

This corresponds to the d.xxx menu.

It shows an overview on the main readings of the AVR. Press the refresh bu�on to

updated the values.

BELTRAME

CENTRO SERVIZI ENERGIA

Summary of Contents for S 2022















































Search results

Summary of Contents for S 2022

Reviews:

Related manuals for S 2022

Brands by name

Popular brands

Beltrame S 2022, User Manual

Search results

Summary of Contents for S 2022

Reviews:

Related manuals for S 2022

Brands by name

Popular brands